How to Configure Your Wi-Fi Network and Device for NOMA iQ™
How to Sync Google Assistant with NOMA iQ™
How to Sync Amazon Alexa with NOMA iQ™
How to Create, Edit or Delete a NOMA iQ™ Experience
How to Create, Edit or Delete NOMA iQ™ Device Groupings
If you’re still having issues, please contact us at info@nomaiq.com
1. Install your NOMA iQ™ smart light bulb into the fixture you wish to use it in.
2. Turn on the light on for 1 second and off for 1 second, 5 times.
3. Your light bulb will flash on and off to indicate it’s in pairing mode
4. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device
1. Connect the power cord to the corresponding port on the controller
2. Connect the light strip to the square connector on the controller
3. Plug the power cord into an electrical outlet
4. Press and hold the button on the controller for 3-4 seconds
5. The light strip will flash on and off to indicate that it’s in pairing mode
6. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device
Yes.
Yes.
Dual Spectrum means that the light has two modes and is capable of providing the necessary spectrum for the growing stage along with the flowering stage.
Dual Spectrum means that the light has two modes and is capable of providing the necessary spectrum for the growing stage along with the flowering stage.
The light modes are Growing and Flowering. The Growing mode produces light focused in the blue spectrum and is used by plants during their growing and vegetative periods. The Flowering mode produces light focused in the red spectrum, which will help encourage flowering and fruiting of your plants.
1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi network.
2. Install your smart grow light bulb in a light fixture and turn the light fixture ON.
3. If the bulb is flashing, continue to step 4. Otherwise set it to pairing mode by cycling the light ON/OFF about 4-5 times with 1-2 second intervals in between ON and OFF.
4. Make sure Bluetooth® and Locations Services are enabled on your mobile device.
5. In the NOMA iQ™ app, select the (+) symbol on the top right hand corner to add the device.
6. Select the smart grow light bulb and follow the prompts in the app.
1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi network.
2. Plug your smart grow light into an outlet and turn the light switch ON.
3. If the light is flashing, continue to step 4. Otherwise set it to pairing mode by cycling the switch ON/OFF about 4-5 times with 1-2 second intervals in between ON and OFF.
4. Make sure Bluetooth® and Locations Services are enabled on your mobile device.
5. In the NOMA iQ™ app, select the (+) symbol on the top right hand corner to add the device.
6. Select the smart grow light and follow the prompts in the app.
You can connect up to 7 units together. Maximum length should be 5' (1.5 m) or less.
The A19 bulb has a beam angle of 150 degrees, while the BR30 has a beam angle of 110 degrees. A beam angle of a lamp is the angle at which the light is distributed or emitted.
Yes, the A19/BR30 bulbs can be used in regular household lamps if they're used for plants.
The colour of the light has an amber/pink look to it.
The light colour temperature is 2200 Kelvins.
A BTU is a British Thermal Unit, and it's a measure of how much energy your air conditioner uses to remove heat from your home in one hour.
Using the NOMA iQ™ app, you can control the Temperature Settings, Fan Speed and Swing of your Portable AC.
Using the NOMA iQ™ app, you can control the Temperature Settings and Fan Speed Settings of your Window AC.
Yes, you can pair multiple ACs to your mobile app. You can create a Group and add your ACs to the Group in order to control multiple ACs at a time.
NOMA iQ™ app allows you to create automated schedules or routines through a feature called Experiences. You can configure Experiences to run your ACs during your desired custom schedules (ex: every weekday from 11:00 p.m. to 7:00 a.m.) with the desired AC settings (Temperature, Fan Speed, etc.).
Yes, you can pair your ACs to Google Assistant and Amazon Alexa and control the ACs using your voice.
To pair your ACs to these Voice Assistants, open the NOMA iQ™ app, click on the Voice Assistants option in the Menu on the top left corner and follow the instructions in the app.
Once paired, you can control your ACs using your voice.
In the event of a power outage, the device will automatically restart to its original state once power is restored.
The highest temperature that can be set is 30°C (86°F), and the lowest temperature that can be set is 16°C (60°F).
Please refer to the User Manual for instructions on how to store your portable air conditioner unit.
1. Drain the water completely. See "Draining the Air Conditioner“ in User Manual.
2. Run the air conditioner set to Fan Only for approximately 12 hours to dry the air conditioner.
3. Unplug the air conditioner.
4. Remove the flexible exhaust hose and store with the air conditioner in a clean, dry area. See "Installation Instructions".
5. Remove the window kit and store with the air conditioner in a clean, dry area. See "Installation Instructions".
6. Remove the filter and clean. See "Cleaning the Air Filter".
7. Clean the outside of the air conditioner. See "Cleaning the Outside".
8. Reinstall the filter.
9. Remove the batteries and store the remote control with the air conditioner upright in a clean, dry area.
Check the filter every 2 weeks to see if it needs cleaning.
Note: Do not operate the air conditioner without a filter in place.
1. Turn off the air conditioner.
2. Open the upper and lower back panels. Grasp the centre of the filter and pull it up and out.
3. Clean the air filter with a vacuum cleaner. If the air filter is very dirty, clean it in warm water with a mild detergent. Do not clean the air filter or use any chemical cleaner in the dishwasher. Thoroughly air dry the filter before replacement to ensure maximum efficiency.
4. Install the air filter back into the air conditioner and close the upper and lower back panels.
SACC stands for Seasonal Adjusted Cooling Capacity and is the standard for portable air conditioners. It is a rating in BTU/hour that represents the weighted average performance of a portable AC in a number of test conditions, some of which may be more extreme than the average use case, which is then adjusted to account for the effect of infiltration air and duct heat transfer.
Previously, portable ACs were rated similarly to other styles of air conditioners using the ASHRAE standard. As there is a difference between stationary and portable units, SACC was introduced to better reflect the energy efficiency of each model. While the SACC BTUs are lower than the previous ASHRAE BTUs, the models remain unchanged.
1. Fan: Only the fan runs without cooling. The fan speed can be adjusted from low, medium and high.
2. Dry: Dries the room to reduce the humidity. The AC automatically selects the temperature and low fan speed.
3. Cool: Cools to reduce the room temperature. The fan speed can be adjusted from low, medium or high.
It is entirely normal for your air conditioning unit to produce a little bit of water during routine functioning. This water is stored in the portable AC’s water tank. If you notice water dripping out of your portable AC, please ensure that the drain plugs are properly sealed/plugged.
1. Initial Setup
When the device is first plugged in, the display will show “77” indicating that the unit is in pairing mode (if it is not displaying “77”, please go to step 5). In order to pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right hand corner. Select the device and follow the instructions within the app.
2. Pre-Connected Network
If any pre-connected WiFi network is found, the device will connect automatically and the device status in the NOMA qi app will be updated.
3. No Pre-Connected Network
If no pre-connected WiFi network is found, make sure the device is in pairing mode (see step 5). Once connected, the device status in the NOMA iQ app will be updated.
4. No Network Found
If no WiFi network is found after 5 minutes during the pairing process, the WiFi function will automatically turn off and the display will show the room temperature. The unit can still be used with the control panel or remote control.
5. Reset WiFi Connection/Pairing Mode
To reset your WiFi connection or to set the device to pairing mode, press the "SWING" button on the remote control 6 times (each press will yield a beep). Wait 2 seconds for the display on the control panel to show "77" indicating that the device is in pairing mode. In order to pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right hand corner. Select the device and follow the instructions within the app.
6. No Cloud Connection
If the Cloud is down or WiFi signal drops, the device cannot connect to the cloud; the device status in the NOMA iQ app will show as offline.
7. Power Cycle or Outage
Once a connection has already been established, in the event of a power outage, the unit will restart once power is restored. If the unit is unplugged, plug the device back in and the device will connect to the pre-connected network. If the device has not been paired, upon power up it will go to Initial Setup (see Step 1).
NOTE: While the device is in pairing mode and the display shows “77”, the control panel display, buttons and LEDs will be inoperative for 5 minutes if unpaired. Please pair the device as mentioned in step 1, or if the device is to be used without smart control, please use the remote to control the device while ensuring it’s pointed at the receiver. After 5 minutes if unpaired, the display will show the room temperature and the device can be controlled by remote control or control panel.
*KEEP REMOTE IN A SECURE LOCATION AS IT’S REQUIRED FOR PAIRING.
It is recommended to store the window air conditioner indoors during the winter.
Check the filter every 2 weeks to see whether it needs cleaning.
NOTE: Do not operate the air conditioner without the filter in place.
1. Turn off the air conditioner.
2. Open the front panel. Grasp the centre of the filter and pull up and out.
3. Use a vacuum cleaner to clean the air filter. If the air filter is very dirty, wash it in warm water with a mild detergent. Do not wash the air filter in the dishwasher or use any chemical cleaners. Air dry the filter completely before replacing to ensure maximum efficiency.
4. Replace the air filter back into the air conditioner, and close the front panel.
Please refer to the User Manual for instructions.
1. Run the air conditioner set to Fan Only for approximately 12 hours to dry the air conditioner.
2. Unplug the air conditioner.
3. Remove all accessories and store with the air conditioner in a clean, dry area. See "Installation Instructions“ in User Manual.
4. Remove the filter and clean. See "Cleaning the Air Filter".
5. Clean the air conditioner. See "Cleaning the Front Panel".
6. Reinstall the filter.
7. Remove the batteries and store the remote control with the air conditioner upright in a clean, dry area.
The 10,000 and 12,000 BTU units have the same dimensions. The unit’s exterior dimensions are L x W x D 18 7/8 x 21 7/8 x 14 9/16"
(48 x 55.5 x 37 cm). The window dimensions should be at least larger than L x W: 18 7/8 x 21 7/8" (48 x 55.5 cm).
Yes, it's normal for water to be dripping outside.
The filter can be found in the front panel.
The highest temperature that can be set is 30°C (86°F), and the lowest temperature that can be set is 16°C (60°F).
The serial number can be found on a label on the window AC unit. The label is located on the top of the AC unit.
In the event of a power outage, the device will automatically restart to its original state once power is restored.
1. Fan: Only the fan runs without cooling. The fan speed can be adjusted from low, medium and high.
2. Dry: Dries the room to reduce the humidity. The AC automatically selects the temperature and low fan speed.
3. Cool: Cools to reduce the room temperature. The fan speed can be adjusted from low, medium or high.
4. Eco: Eco cools the room while saving energy. This mode slowly runs your AC compressor, which reduces the pressure in the condenser and allows the motor to consume less energy to run the unit.
When the device is plugged in, the WiFi LED will flash slowly indicating that the unit is in pairing mode. In order to pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right hand corner. Select the device and follow the instructions within the app.
2. Pre-Connected Network
If any pre-connected WiFi network is found, the device will connect automatically and the WiFi LED will remain lit.
3. No Pre-Connected Network
If no pre-connected WiFi network is found, make sure the device is in pairing mode (see step 5). Once connected, the WiFi LED will remain lit.
4. No Network Found
If no WiFi network is found after 5 minutes during the pairing process, the WiFi function will automatically turn off and the WiFi LED will turn off. The unit can still be used with the control panel or remote control.
5. Reset WiFi Connection/Pairing Mode
To reset your WiFi connection or to set the device to pairing mode, press and hold the "CONNECT" icon on the control panel until the WiFi LED starts flashing indicating that the device is in pairing mode. In order to pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right hand corner. Select the device and follow the instructions within the app.
6. No Cloud Connection
If the Cloud is down or WiFi signal drops, the device cannot connect to the cloud; the WiFi LED will turn off.
7. Power Cycle or Outage
Once a connection has already been established, in the event of a power outage, the unit will restart once power is restored. If the unit is unplugged, plug the device back in and the device will connect to the pre-connected network. If the device has not been paired, upon power up it will go to Initial Setup (see Step 1).