How to set up a portable shelter

STEP 1

Select shelter size and strength

STEP 2

Lay frame parts on a flat surface

STEP 3

Follow the set up instructions

STEP 4

Assemble frame from roof structure

STEP 5

Build the end rib first, then the intermediate end rib

STEP 6

Attach intermediate rib to the end rib

STEP 7

Hand tighten fasteners

STEP 8

Attach all remaining ribs

STEP 9

Assemble the final end rib

STEP 10

Square the frame according to the manual using a measuring tape

STEP 11

Rotate the anchors

Rotate the anchors into the ground until the eye-lid is about 1 to 2 inches from the ground. Use one anchor per leg to secure your shelter.

STEP 12

Use a ratchet to tighten all fasteners

STEP 13

Roll-up the entrance door and secure with bungee balls

STEP 14

Center the cover

Pull the cover over the frame making sure it is centered. Check that there is an equal amount of overhang on all corners.

STEP 15

Slide the counter weights in at the bottom of the cover and affix them together

STEP 16

Tighten each corner

When the cover is installed properly you should not be able to put your fingers between the fabric and the ribs. The cover should lay evenly without wrinkles.